Hurry up. It's compact. This is comfortable.
The 5-port Gigabit D-Link DGS-1005P switch allows you to connect to the data network and power Power over Ethernet (PoE) devices such as Wi-Fi access points (APs), IP surveillance cameras and IP phones. It's a compact switch with a metal housing and it works quietly. It's Plug & Play, so it doesn't require any technical knowledge.
DGS-1005P has a plug-and-play installation and requires no configuration.
Automatic MDI/MDI-X support on all ports eliminates the need for cross wires when connecting to another switch, and auto-negotiation on each port intelligently adjusts the port speed to be compatible with the connected device. With wire-speed filtering and store-and-forward switching capabilities, DGS-1008MP maximizes network performance and minimizes the transmission of erroneous network packets.Power over Ethernet+
DGS-1005P has four IEEE 802.3af and IEEE 802.3at PoE-compatible Gigabit Ethernet ports, which supply up to 30 W at each PoE port and provide a total power of 60 W (Power Budget).
You can connect PoE-compatible devices to DGS-1005P to eliminate the need to connect them to an electrical outlet, they will receive power through the data network cable from the switch.
Green technology
DGS-1005P features environmentally friendly technology such as IEEE 802.3az Energy-Efficient Ethernet (EEE), link state detection and cable length detection.
The EEA adjusts the power consumption of the switch depending on network usage, reducing power consumption during downtime. Link status detection turns off unused ports, saving power when connected devices are turned off or disconnected. Cable length sensing adjusts the port power output according to the cable length, reducing the switch's power requirements.
Compact and quiet
The compact design of DGS-1005P allows it to be placed in most places, including those where space is limited.
The desktop form factor provides everything needed to set up a new network or expand an existing network, while the fanless design ensures quiet operation even in noise-sensitive areas such as workstations and meeting rooms.
- General
- Interfaces: 5 ports 10/100/1000BASE-T
- Standards
- IEEE 802.3 10BASE-T Ethernet (copper with twisted pair)
- For the purposes of this Regulation, the following definitions shall apply:
- For the purposes of this Regulation, the following definitions shall apply:
- Flow control IEEE 802.3x
- For the purpose of this Regulation, the following definitions shall apply:
- In the case of vehicles of categories M1 and N2
- Interchange of the multimedia interface: automatic adjustment of MDI/MDI-X at all ports
Performance
- Switching tissue: 10 Gbps
- Method of transmission: Save and send
- Rate of data transfer
- Gigabit Ethernet
- For the purposes of this Regulation, the following definitions shall apply:
- Fast Ethernet
- For the purposes of this Regulation, the following definitions shall apply:
- Ethernet
- For the purposes of this Regulation, the following definitions shall apply:
- Packet filtering / forwarding speeds: 7,44 Mpps
- MAC address table: 2K entries by device
- Buffered RAM: 64 KB per device
PoE
- PoE standards
- IEEE 802.3af
- Manufacture from materials of any heading
- PoE compatible ports: ports 1 to 4
- Power consumption: 60 W (30 W maximum per PoE port)
Physical characteristics
- LED: maximum power / PoE (per unit), power / state (per port), activity / link and speed (per port)
- Weight: 0,26 kg
- Size: 100 x 98 x 28 mm
- DC input: external power adapter 53,5 V / 1,2 A
- Energy consumption
- Power consumption of the vehicle
- Maximum of 3,08 W (PoE off)
- 0,54 W (on standby)
- Temperature
- Operating conditions: 0 to 40 °C
- Storage: -10 to 70 °C
- Humidity
- Operation: 0% to 95% RH without condensation
- Storage: 0% to 95% RH without condensation
Certificates
- In the case of vehicles of categories M1 and N2
- THE FOLLOWING INFORMATION SHALL BE PROVIDED TO THE COMPETENT AUTHORITY: