TP-Link CPE510 PoE Wireless Access Point 300Mbps/ 5GHz/ 13dBi Antenna/ WiFi 802.11n/a

13dBi Outdoor CPE on 5GHz at 300Mbps

13dBi and 2x2 Dual Directional MIMO Antennas
Adjustable transmit power from 0 to 23 dBm.
System-level optimizations for wireless transmission over 15 kilometers range
Pharos MAXtream TDMA (Time-Division-Multiple-Access) TP-LINK technology improves product performance, capacity, and latency, ideal for PTMP applications
Centralized Management System - Pharos Control
Modes of Operation: AP / Client / AP Router / AP Router Client (WISP)
Passive PoE adapter supports up to 60 meters (200 feet) of PoE deployment and allows the device to be remotely reset

Enterprise Hardware

With Qualcomm Atheros-level chipsets, high-gain antennas and high-quality material, purpose-built enclosure and PoE power supply, CPE510 is specially designed for outdoor use and can run smoothly in almost any weather, with operating temperatures ranging from -40°C (-40°F) to +70°C (158°F).

Advanced Antenna System

Built-in high-gain dual-polarization antenna
Dedicated metal reflector ensures higher gain and less noise interference

15 km + Wireless data transmission

Specially designed for outdoor use, ideal for long-distance wireless data transmission over 15km, field-proven.

TP-Link MAXtream TDMA Technology

As network scale increases, wireless competition and collisions between CPEs and base stations will be so enormous that actual network performance will decrease, severely impacting the end-user experience. To mitigate these effects, the CPE510 uses MAXtream TDMA technology.

Pharos Control - Centralized Management System

CPE510 also comes equipped with centralized management software that helps users easily manage all the devices on their network from a single PC – Pharos Control. Features such as device discovery, health monitoring, firmware update, and network maintenance can be managed using Pharos Control.

Pharos

Easy-to-use web-based management system allows professionals to make more targeted configurations

• HARDWARE FEATURES
• Processor: Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc
• Memory: 64MB DDR2 RAM, 8MB Flash
• Interface: 1 x 10/100Mbps Shielded Ethernet port (LAN0, Passive PoE input)
• 1 Ground Terminal
• 1 Reset Button
• Power Supply: Passive PoE adapter via LAN0 (+4.5pins; -7.8pins)
• Voltage Range: 16-27VDC
• Power Consumption: Maximum 9.8 W
• Note: When configured using the passive POE adapter, the power obtained from the power supply will vary depending on the length of the connection cable.
• Dimensions: 224 x 79 x 60 mm
• Antenna Type: 13dBi 2x2 Double Polarized Directional Antenna
• Beam Width: 45° (H-Plane) / 45° (E-Plane)
• Note: For more details, please refer to the data sheet
• Protection: 15KV ESD protection
• 6000V lightning protection
• Housing: ASA Stabilized Plastic Material for Outdoor
• IPX5 Water Certified
• WIRELESS FEATURES
• Wireless Standards: IEEE 802.11a/n (with Pharos MAXtream disabled)
• Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
• Wireless speed: Up to 300Mbps (40MHz, dynamic)
• Up to 144.4Mbps (20MHz, Dynamic)
• Up to 72.2Mbps (10MHz, Dynamic)
• Up to 36.1Mbps (5MHz, Dynamic)
• Frequency: 5.15~5.85GHz
• Note: The available working frequency may vary depending on the limitations of the countries or regions where the device is in use.
• Transmit Power: 27dBm/500mw (Adjustable Power up to 1dBm)
• Note: Maximum transmit power may vary across different channels depending on the limitations of the countries or regions in which the device is used.
• SOFTWARE FEATURES
• Wireless Configurations: TDMA MAXTream Pharos Technology
• 802.11a/n modes
• Selectable Channel Width: 5/10/20/40MHz
• Automatic Channel Selection
• Power Transmission Control
• Dynamic Frequency Selection (DFS)
• WDS On/Off
• Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) encryption, and WEP 64/128/152-bit encryption
• SSID Broadcast On/Off
• Multi-SSID with VLAN tagging (AP mode only)
• Timeout settings in Distance/ACK
• Wireless MAC Address Filtering
• Advanced Wireless Options:
• > Beacon Interval /RTS Threshold/Fragmentation
• >Threshold/ DTIM Interval/ AP Isolation/Short GI/Wi-Fi Multimedia
• Management: Remote sensing and management via the Pharos Control app
• HTTP/HTTPS Web-based management
• System Registration
• SNMP Agent (v2c)
• Ping Watch Dog
• Dynamic DNS
• SSH Server
• System Tools: Wireless Signal Quality Indicators:
• Signal Strength / Noise / Transmit CCQ / CPU / Memory
• Monitoring: Throughput / Stations / Interfaces / ARP / Routes / WAN / DHCP
• Spectrum Analyzer
• Speed Test
• Ping
• Traceroute
• System Level Optimizations: Optimized IGMP Snooping/Proxy for Multicast Applications
• Hardware watch dog
• POE ADAPTER FEATURES
• Dimensions(W*D*H): 110*57*33.5mm
• Interfaces: 1 x Grounded AC Jack
• 1 x 10/100Mbps shielded Ethernet port (stream + data)
• 1 x 10/100Mbps shielded Ethernet port (data)
• Button: Remote Reset Button
• Power Status LEDs: Green
• Input: 100-240VAC, 50/60Hz
• Output: 24VDC, 1.0A Max
• +4, 5pins; -7, 8pins. (Supports up to 60m Power over Ethernet)
• Efficiency: >80%
• Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
• OTHER
• Certifications: CE, FCC, RoHS, IPX5
• Package Contents: Outdoor Wireless CPE
• 24V 0.5A Passive PoE Adapter
• Mounting Straps
• AC Power Cord
• Installation Guide
• System requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 8, Windows 7, MAC OS, NetWare, UNIX, or Linux.
• Note: We recommend that you use one of the following internet browsers for an enhanced user experience: Google Chrome, Safari, and Firefox. The Internet Explorer browser is not recommended.
• Environmental Factors: Operating Temperature: -30°C~70°C (-22°F~158°F)
• Storage Temperature: -40°C~70°C (-40°F~158°F)
• Operating Humidity: 10%~90% non-condensing
• Storage Humidity: 5%~95% non-condensing