TP-Link CPE210 PoE Wireless Repeater Access Point 300Mbps/ 2.4GHz/ 9dBi Antenna/ WiFi 802.11n/b/g

9dBi Outdoor CPE on 2.4GHz at 300Mbps

Incorporates 9dBi 2x2 dual-polarized and directional MIMO antennas
Adjustable transmit power from 0 to 20dBm.
System-level optimizations for long-distance wireless transmission over 5 kilometers range
Pharos MAXtream TDMA (Time Division Multiple Access) TP-LINK technology improves product performance, capacity and latency, making it ideal for PTMP applications
Centralized Management System – Pharos Control
Modes of Operations: AP / Client / Bridge / Repeater / AP Router / Client Router AP Client (WISP)
Passive PoE adapter allows up to 60 meters (200 feet) of PoE deployment and allows the device to be reset remotely

2.4 GHz, 300 Mbps, 9 dBi outdoor CPE

Enterprise Hardware

Featuring Qualcomm Atheros-level chipsets, high-gain antennas, and
High-quality material, specially designed housing and PoE power supply, CPE210 is
specially designed for outdoor use and can run smoothly in almost any weather, with operating temperatures ranging from -40°C (-40°F) to +70°C (158°F).

Advanced Antenna System

Built-in high-gain dual-polarization antenna
Dedicated metal reflector ensures higher gain and less noise interference

5 km + Wireless data transmission

Specially designed for outdoor use, ideal for long-distance wireless data transmission of more than 5km, field-tested.

TP-Link MAXtream TDMA Technology

As network scale increases, wireless competition and collisions between CPEs and base stations will be so enormous that actual network performance will decrease, severely impacting the end-user experience. To mitigate these effects, the CPE210 uses MAXtream TDMA technology

Pharos Control - Centralized Management System

The CPE210 also comes equipped with centralized management software that helps users easily manage all the devices on their network from a single PC: Pharos Control. Features such as device discovery, health monitoring, firmware update, and network maintenance can be managed using Pharos Control.

Pharos

Easy-to-use web-based management system allows professionals to make more targeted configurations

• HARDWARE FEATURES
• Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc
• Memory: 64MB DDR2 RAM, 8MB Flash
• Interface: 1 x 10/100Mbps shielded Ethernet port (LAN0, Passive PoE Input)
• 1 Grounding Terminal
• 1 Reset Button
• Power Supply: Passive PoE adapter via LAN0 (+4.5pins; -7.8pins)
• Voltage Range: 16-27VDC
• Power Consumption: Maximum 5 Watts
• Note: When configured using the passive POE adapter, the power obtained from the power supply will vary depending on the length of the connection cable.
• Dimensions: 224 x 79 x 60 mm
• Antenna Type: 9dBi 2x2 MIMO Double Polarized Directional Antenna
• Beam Width: 65° (H-Plane) / 40° (E-Plane)
• Note: For more details, please refer to the data sheet
• Protection: 15KV ESD protection
• 6000V lightning protection
• Housing: ASA Stabilized Plastic Material for Outdoor
• IPX5 Water Certified
• WIRELESS FEATURES
• Wireless Standards: IEEE 802.11b/g/n (with Pharos MAXtream disabled)
• Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
• Wireless Speed: Up to 300Mbps (40MHz, Dynamic)
• Up to 144.4Mbps (20MHz, Dynamic)
• Up to 72.2Mbps (10MHz, Dynamic)
• Up to 36.1Mbps (5MHz, Dynamic)
• Frequency: 2.4~2.483GHz
• Note: Available operating frequencies may vary depending on the limitations of the countries or regions where this device is used.
• Transmit Power: 25dBm/316mw (adjustable power up to 1dBm)
• Note: Maximum transmit power may vary on different channels depending on the limitations of the countries or regions where the device is used.
• SOFTWARE FEATURES
• Wireless Configurations: Pharos MAXtream TDMA Technology
• 802.11b/g/n modes
• Selectable bandwidth: 5/10/20/40MHz
• Automatic Channel Selection
• Transmit power control
• Dynamic Frequency Selection (DFS)
• WDS Enabled/Disabled
• Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) encryption, 64/128/152 bit WEP encryption
• SSID Broadcast Enabled/Disabled
• Multi-SSID with VLAN tagging (AP mode only)
• Distance/ACK Timeout Setting
• Filtering using MAC addresses over Wi-Fi
• Advanced Wi-Fi Features:
• Beacon Interval/RTS Threshold/Fragmentation
• Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
• Management: Remote discovery and management via Pharos control applications
• HTTP/HTTPS web-based management
• System Registration
• SNMP Agent (v2c)
• Ping Watch Dog
• Dynamic DNS
• SSH Server
• System Tools: Wi-Fi Signal Quality Indicators:
• Signal Strength/Noise/Transmission CCQ/CPU/Memory
• Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
• Spectrum Analyzer
• Speed Test
• Ping
• Traceroute
• System-Level Optimizations: Optimized IGMP Snooping/Proxy for Multicast Applications
• Watchdog by Hardware
• POE ADAPTER FEATURES
• Dimensions(W*D*H): 110*57*33.5mm
• Interfaces: 1 x Grounded AC Jack
• 1 x 10/100Mbps shielded Ethernet port (Power + Data)
• 1 x 10/100Mbps shielded Ethernet port (Data)
• Button: Remote Reset Button
• Power Status LEDs: Green
• Input: 100-240VAC, 50/60Hz
• Output: 24VDC, 0.6A Max
• +4, 5pins; -7, 8pins. (Supports up to 60m power over Ethernet)
• Efficiency: >80%
• Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
• OTHER
• Certifications: CE, FCC, RoHS, IPX5
• Package Contents: Wireless External CPE
• 24V 0.6A Passive POE Adapter
• Mounting Straps
• Power Cord
• Installation Guide
• System requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 8, Windows 7, MAC OS, NetWare, UNIX, or Linux.
• Note: We recommend that you use one of the following web browsers for an enhanced user experience: Google Chrome, Safari, or Firefox. The Internet Explorer browser is not recommended.
• Environmental Factors: Operating Temperature: -40°C~70°C (-40°F~158°F)
• Storage temperature: -40°C~70°C (-40°F~158°F)
• Operating humidity: 10%~90% non-condensing
• Storage Humidity: 5%~95% Non-condensing