Switch Gestionado D-Link DGS-1250-28X 28 Puertos/ RJ-45 Gigabit 10/100/1000/ SFP

Gigabit Smart Managed Switches with 10G uplink

Designed with high density Gigabit ports and uplinks to 10 Gigabit for copper or fiber, without forgetting the versatility of PoE for installation of access points, cameras, etc. Management with CommandLine Interface (Full CLI), console port and Web Gui, with Layer 2 and Layer 3 Lite (StaticRouting) functionality. With all these features combined, the DGS-1250 range offers excellent cost/performance for almost any scenario or different network topologies.

10 Gigabit connectivity

Each switch in the series has four 10 GbE SFP+ ports, either for long-distance uplink defibers (e.g. with D-Link DEM-431XT transceivers) or copper ((D-Link DEM-410T))

Advanced features

The DGS-1250 range also supports advanced layer 3 features such as Static Routing, allowing you to segment your network into workgroups that communicate between VLANs. With this, you can reduce the load on your main devices, allowing you to create a scalable and efficient network.

SPECIFICATIONS

• This Regulation shall be binding in its entirety and directly applicable in all Member States
• HW version: A1
• Interfaces: 24 x 10/The data shall be transmitted in accordance with the following format:
• Console port: RJ-45 port for CLI management
• Port standards
  • IEEE 802.3 10BASE-T Ethernet (copper with twisted pair)
  • For the purposes of this Regulation, the following definitions shall apply:
  • IEEE 802.3u 100BASE-FX 100 Mbps over optical fiber
  • For the purposes of this Regulation, the following definitions apply:
  • IEEE 802.3z 1000BASE-X 1 Gbps over optical fiber
  • For the purposes of this Regulation, the following definitions shall apply:
  • Flow control IEEE 802.3x
  • For the purposes of this Regulation, the following definitions shall apply:
  • In the case of vehicles of categories N1 and N2, the maximum authorised mass of the vehicle shall not exceed:
• Network cables: UTP Cat. 5, cat. 5e (100 m maximum)
• Duplex mode: Full / Medium-duplex for 10/100 Mbps / Full-duplex for 1000 Mbps

• PERFORMANCE

• Switching capacity: 128 Gbps
• Method of transmission: Save and send
• MAC address table: 16K
• Static MAC addresses: 256 entries
• Maximum packet forwarding speed of 64 bytes: 95.24 Mpps
• Packet buffer memory: 12 Mbits
• Memory of the CPU: 2G DDR3
• Flash memory: 64 MB

• PHYSICAL CHARACTERISTICS

• Power supply: Internal universal power supply of 100 to 240 V AC 50/60 Hz
• Maximum power consumption: 29.6 W
• MTBF: 743.482.45 hours
• Size: 440 x 140 x 44 mm
• Weight: 1.75 kg